CONTROL ZONES

Where you have a “firewall” joining a roof, there can be a serious compromise on the fire protection, as a “flash over” can happen leading to fire travelling through the gap, however small, where the wall and roof meet.

FIREFLY offers a really simple solution to maintain the integrity of the fire wall.

This application is sometimes referred to as a Control Zones, or a Protected Zone and in some cases an Umbrella Zone.

Any of the insulated products can be used for this application, but basically FIREFLY VULCAN for 1 hour or FIREFLY PLUS60 for 2 hours. The products can be extended out a minimum of 1.5 metres along the roof, and then vertical down the side of the Firewall to the floor.

Utilising the unique FIREFLY Rapid Install System, manufactured by Metsec, for all the metal and fixings.