STANDARD VERTICAL INSTALLATION

Traditionally the only product available for Fire Barrier applications, was a mineral fibre type, with installations often being difficult and cumbersome to achieve, especially in confined areas.

FIREFLY Fire barriers were developed to offer a flexible, lightweight, non-respirable, and easy to install product for all types of horizontal and vertical installations.

Typically the barrier is installed with the barriers fixed at the top with a support, and continuous galanvanised angle along the top, sides and bottom, screwed through at 250 centres.

A 100mm overlap should be left at all perimeters, and the stud and galvanised angle should be of a minimum gauge of 0.5mm. Heavier gauge metal can be used.

This method creates a complete barrier to fire, smoke and when using the one of the insulated barriers, heat penetration.

If there are penetrations through the barrier, please refer to the “Penetration Management” section.